Z900e Mini AC CZPT Variable Frequency CZPT, VFD, Pace Controller
Application
Food CZPTy : Dumpling CZPT ,Mixer ,Encrusting Machtine ,Pastry CZPT
Woodworking CZPTry : Sharpening CZPT ,Grinding CZPT ,Engraving CZPT
CNC CZPTs ,Treadmills ,Grinders ,Drilling CZPTs ,Coating CZPTs ,Milling CZPTs ,Edge banding CZPTs .
Little pumps ,Blower,Converying CZPTs
CZPT Washing CZPTs ,Centrifuges ,Air CZPTs ,Stone Cutting CZPT
If you have any concern about our firm and merchandise feel totally free to get in touch with me .
Creation Technical specs:
| Items |
Z900GE |
|
| Electrical power CZPT |
Rated voltage, Frequency | Single phase/Three phase 220V 50/60Hz |
| Voltage Range | 220V:170V~240V 380V:330~440V | |
| Output | Voltage Range | 220V:~220V,380V:~380V |
| Frequency Range | .10`400.00Hz | |
| Control method | Sensorless flux vector control (SFVC) Voltage/Frequency (V/F) control |
|
| Indicator | Operating status/Alarm definition/interactive guidance: eg , frequency setting, the output frequency/existing, DC bus voltage, the temperature and so on. | |
| Control Specifications | Output Frequency Range | .10Hz~400.00Hz |
| Frequency Setting Resolution | Digital input:.01Hz, analog input:.1% of maximum output frequency | |
| Output Frequency Accuracy | .01Hz | |
| V/F Control | Setting V/F curve to satisfy various load requirements | |
| Torque Control | Auto increase: auto raise torque by loading condition manual increase enable to set0.~twenty.% of raising torque | |
| Multifunctional lnput CZPTinal |
Six multi-function input terminals, realizing functions including fifteen section speed control, program running, four-section acceleration/deceleration speed switch, UP/DOWN function and emergency stop and other functions | |
| Multifunctional Output CZPTinal |
2 multi-function output terminals for displaying of running, zero speed, counter, external abnormity, program operation and other information and warnings | |
| Acceleration/deceleration Time Setting | ~-999.9s acceleration/deceleration time can be set individually | |
| Other Functions | PID Control | Developed-in PID control |
| RS485 | Standard RS485 communication function(MODBUS) | |
| Frequency Setting | Analog input:0 to 10V,,0 to 20mA can be selected Dig ital input: Input using the setting dial of the operation panel or RS485 or UP/DOWN |
|
| Multi-velocity | Six multifunction input terminals, 15section speed can be set | |
| CZPT voltage regulation | CZPT voltage regulation function can be selected | |
| Counter | Built -in 2group of counters | |
| CZPT/ Warning Function |
Overload | one hundred fifty%,60 CZPT(Constant torque) |
| Over Voltage | Over voltage protection can be set | |
| Under Voltage | Under voltage protection can be set | |
| Other CZPTs | Overheat, short circuit, over current, and parameter lock and so on | |
| CZPT | Ambient Temperature | -10ºC to 40ºC(non-freezing) |
| Ambient Humidity | Max.95%(non-condensing) | |
| Altitude | Lower than 1000m | |
| Vibration | Max. 0.5G | |
| Framework | CZPT Mode | Forced air cooling |
| Protective Structure | IP20 | |
| Installation | Method | Wall Mounted |
A lot more information feel free to make contact with me