Stainless Steel Self-Priming Centrifugal CIP Pump

Stainless Steel Self-Priming Centrifugal CIP Pump

Introduction
YL stainless metal sanitary grade Self-priming Pump adopts acid-resisting stainless metal (AISI 304, 316) in pump human body, which has exclusive acid and alkali resistance, and comply with sanitary demands for food items.
As a positive displacement pump, its attributes are exceptional to centrifugal pump since it suction liquid blended with air or foams and even merely air. 
It is broadly utilised to suction materials with liquid amount underneath the pump, For instance in the milking area, it suctions milk from the milk barrel. 
It can also be used in automated CIP cleansing program as return circulation pump in cleansing tank. The mechanical sealing is the build-in inflow variety, and the temperature of suctioned material is no increased than 100ºC.

Major Features
1. The impeller is created as open variety impeller, which deepens the inlet cavity of impeller, improve the inlet attribute of pump and keep away from cavitation, with sanitary mirror polishing.
two. The impeller and shaft are created as taper matching, and the locking nut is offered with seal to stop the liquid from entering the shaft sleeve and thread, or else, dead comer will be developed.
3. The mechanical seal is so designed that there is no bolt and spring getting in contact with materials ,which can be totally cleaned with out any air pollution.
4. The pump body is offered with drain valve to discharge residua liquid so as to promise there is no dead corner.
five. CZPT: the liquid passing elements (wetted components) can be produced of SS304 or SS316L. The roughness after good mirror sprucing is Ra<0.4um.
6. The parts and connections that the liquid will pass have to be cleaned and there shall have no residuals following cleansing and sterilization, so as to realize the sanitary and aseptic conception in a real sense.
 
Primary purposes
one. Use to the transfer of the mediums that are reduced/middle viscosity, reduced corrosive & with suspended strong.
two. Primarily employed for pharmacy, liquor sector, foodstuff sector, chemical industry, drink and other industries.
 
Solution details

Operating Principle: Centrifugal
Primary apps:   Foods fluid, wine, drinking water, mink, etc
CZPTr: CZPTtric motor
Max.permissible fluid temperature: 100°C(212°F) / 150°C(302°F) anti-warmth seal
Set up place: Horizontal
Casing/Internal components materials: CZPT Metal/CZPT steel
CZPT ranking:  Up to 18.5KW(25HP)
Optimum caliber:   89mm(3.5inch)
Maximum discharge-facet pressure: .45MPa(4.5bar)
Maximum head: 45m(147.6ft)
Maximum suction carry:   8m(26ft)
Circulation rate variety:   five-60m3/h(22-264US.GPM)

 
Efficiency info

Model  Capability
(m3/h)
Head
(m)
Inlet  Outlet  Power Suction lift 
(mm) (Inch) (mm) (Inch) (KW) (m)
SLRP-5 five 18 51 two” fifty one 2 “ 1.five eight
SLRP-fifteen 15 28 sixty three two 1/2″ fifty one 2 “ 3 eight
SLRP-twenty 20 28 sixty three 2 one/2″ fifty one two “ four 8
SLRP-25 twenty five 28 63 two 1/two” sixty three two one/two” five.5 8
SLRP-30 thirty 28 sixty three two one/2″ 63 2 one/2″ seven.5 eight
SLRP-forty 40 forty seventy six three” seventy six 3″ eleven 8
SLRP-50 50 45 89 three 1/2″ 89 three one/2″ fifteen 8
SLRP-sixty sixty 45 89 3 1/2″ 89 3 one/2″ eighteen.five eight

Motor specification
Voltage:          110~240V solitary section (.75~one.5KW), 220~440V 3phase 
Frequency:     50Hz or 60Hz
Kind:              Ordinary mounted pace, Frequency adjustable speed, Explosion evidence
Manufacturer: China large top quality brand, ZheJiang ABB, Siemens, Beide, ABB, and many others

Photographs

Outstanding pumps are fabricated by high-precision equipments and cautiously picked large-high quality components.

For your higher viscosity liquid products transfer, pls refer to our rotary lobe pumps.

Picture for rotary lobe pumps.

CZPT parameters for rotary lobe pumps

Model

Displace-ment

(L/r)

Speed assortment

(r/min)

Capacity
variety
(M³/h)

Max.
Strain

(Mpa)

Electricity

(Kw)

Suction

strain

(Mpa)

Inlet

&outlet

(mm)

Max.
Viscosity

(cp)

25BV12-2

.15

20-600

.09-4.32

one.2

two.2

-.02~-.08

25

1000000

40BV12-five

.32

twenty-550

.18-7.ninety two

one.2

four

-.02~-.08

40

one million

50BV12-8

.forty seven

twenty-550

.28-12.4

1.two

five.five

-.02~-.08

50

a million

50BV12-10

.sixty five

twenty-550

.39-17.sixteen

one.2

seven.5

-.02~-.08

50

1000000

65BV12-twenty

one.seventy four

twenty-550

one.04-forty five.ninety four

1.two

15

-.02~-.08

65

1000000

80BV12-thirty

2.5

twenty-550

1.five-66.00

one.2

22

-.02~-.08

eighty

1000000

80BV12-40

3.sixty five

20-550

two.19-96.00

one.2

30

-.02~-.08

eighty

a million

125BV12-50

4.six

twenty-420

two.76-92.seventy four

1.two

37

-.02~-.08

a hundred twenty five

one million

125BV12-70

6.one

twenty-420

three.sixty six-122.ninety eight

1.2

forty five

-.02~-.08

125

a million

125BV12-eighty

seven.

20-420

four.twenty-141.12

one.2

fifty five

-.02~-.08

one hundred twenty five

a million

150BV12-100

eleven.four

twenty-420

6.eighty four-229.82

1.2

seventy five

-.02~-.08

150

1000000

150BV12-150

12.five

20-420

7.50-252.00

1.2

ninety

-.02~-.08

one hundred fifty

one million

175BV12-200

sixteen.seven

twenty-420

10.02-336.sixty seven

one.2

110

-.02~-.08

175

1000000

Note*

one. Examined medium: drinking water. Your liquid’s density, viscosity and temperature are necessary to source when select the pump.

2. Velocity, circulation fee, electrical electrical power and force will be varified in accordance to different liquid qualities.

three. Port measurement can be altered as needed.

four. YL reserves the proper to modify requirements with no prior notification.

Speak to us

 

Stainless Steel Self-Priming Centrifugal CIP Pump