New Arrival Model: Gt Double Acting Pneumatic Chemical Liquid Pressure Booster Injection Pump

New Arrival Model: Gt Double Acting Pneumatic Chemical Liquid Pressure Booster Injection Pump

CZPT  CZPT Model : GT 250 MM driven large flow  double acting   CZPT

CZPT Liquid Stress Booster Injection Pump

CZPT Info for Air driven liquid pumps


CZPT air pushed liquid  pumps are ratio gadgets that make use of minimal force compressed


air driving a bigger diameter piston (spot x stress) which is linearly related to a scaled-down


hydraulic piston/plunger. Using this ratio principal, a higher hydraulic force can be generated.


CZPT Pump product numbers replicate the pumps nominal pressure ratio, although the technical data 


implies exact ratios.  The outlet stall strain is effortless to set by changing the air push pressure


by way of a basic air force regulator. 


By multiplying the strain ratio by the available shop


air pressure, the nominal liquid pressure can be calculated.


Exmple ( Pump Model: GH40 liquid pump)


Air generate piston region ( 250mm Ø)


CZPT plunger region ( 40 mm Ø)


Actual ratio = forty:1


1.  AIR Generate Section


The air push section is made up of a light fat piston complete with seals operating inside an


aluminum barrel. The diameter of the air piston is 80mm. When compressed air is equipped to


the pump the air pushes the air piston down on a compression stroke


( forces fluid out of the liquid end).


 Under the control of pilot pins (poppet valve) triggered at every stop of the stroke


2. CZPT Area (Wetted End)


The hydraulic part of an air driven liquid pump consists of four major pieces, the hydraulic physique,


the piston/plunger, the check out valves and the primary high stress seal. The hydraulic


piston/plunger is  directly linked to the air piston and it is housed inside of the hydraulic entire body and


its movement up and down creates the liquid flow into and out of the pump through the check


valves. The examine valves are spring loaded and on the suction stroke the inlet examine valve


 opens to the highest making it possible for fluid into the hydraulic entire body and on the compression stroke the


inlet check out valve closes and the discharge check valve opens forcing the pumped fluid into the


approach. The major large stress seal is found within the hydraulic body and the piston/plunger seals


against this for the duration of procedure. There are distinct materials and patterns of higher stress seals


based on the fluid getting pumped and the highest pressures of the pump, nonetheless the


CZPT seals are suitable for each drinking water and hydraulic fluid use.


CZPT air pushed liquid pumps are self-priming, However, large ratio pumps are a lot more difficult to


Prime and might need bleeding. In standard, it is not recommended to use an air- line lubricator.


CZPT  air driven liquid pumps cycle automatically  as the outlet force boosts the


resistance  also increases and the cycle rate decreases until the pump stops immediately


when the output  pressure forces are equal. This is referred to as the stall issue.


The pump will restart with a slight drop in the outlet pressure or an increase in the air push


strain. Pump overall performance can be afflicted by a amount of conditions, such as freezing of the


exhaust muffler or pilot valves (which is caused by moisture in air lines), inadequate inlet air-line


dimensions and dirty filers. When functioning the pumps on a steady foundation, we advocate you use


a optimum cycle rate of 50~60 cycles for every moment.


This will both improve services intervals and aid in avoiding ice forming


at the exhaust. An air provide dryer will also aid in decreasing icing up.


To acquire ideal general functionality, it is advised not to lessen the indicated port sizes


and consult We for flow conditions not demonstrated in charts.

Typical apps for high strain pneumatic water testing pump 

Crucial functions

One particular model available in 8 ratios

Compatibility with a selection of liquids

Safe pneumatic procedure

Aluminum bodies and wetted components of carbon steel or stainless steel

Rugged,compact,dependable and easy servicing confirmed design and style

Substantial quality seals, extended provider daily life obtainable

No want for air line lubrication

Wide software with big assortment of force ratio

Principal technical data 

Typical complex data for air  driven chemical injection pump  

 GT serial Substantial circulation pneumatic chemical injection pump  
Air pushed pressure at seven bar                                                                                   At bar pressure  ,air intake is around  1.six M3 for each min  
Product Piston/Rod diameter ø(mm) Displacement for each stroke(mL) Liquid  IN Liquid OUT Max presusre Bar at driven pressure eight.3Bar Liquid outlet (Bar)     1Bar=.1Mpa=one.019Kg/cm²
20 40 70 100 one hundred fifty 200 300 400 five hundred 600 seven-hundred 900 1200 1700 2350
Movement rate   L/Min 
GT10 eighty 1407.43 PT3/4″ PT3/4″ 83 168.89 140.74 126.sixty seven 112.59 ninety eight.fifty two 84.forty five                  
GT25 50 549.78 PT3/four” PT3/4″ 207 65.97 fifty four.ninety eight 49.48 43.98 38.forty eight 32.ninety nine 27.forty nine 21.ninety nine sixteen.49              
GT40 forty 351.86 PT3/4″ PT3/four” 332 42.22 38.7 35.19 33.43 29.ninety one 26.39 21.eleven seventeen.59 fourteen.07 12.32 ten.56        
GT69 thirty 197.ninety two PT3/4″ NPT1/two” 572 23.seventy five 22.76 21.seventy seven 19.seventy nine 17.eighty one fifteen.83 thirteen.eighty five eleven.88 9.nine seven.92 6.ninety three 5.94 one.ninety eight      
GT100 25 137.44 NPT1/2″ NPT1/2″ 830 16.49 fifteen.eighty one fifteen.12 fourteen.forty three thirteen.74 twelve.37 11 9.sixty two eight.twenty five six.87 five.5 four.81 4.twelve one.37    
GT156 twenty 87.ninety six NPT1/2″ *HF6 1295 10.fifty six 10.12 9.68 9.24 eight.8 7.92 7.04 six.sixteen five.28 4.4 3.fifty two 3.08 2.64 two.two 1.seventy six  
GT190 18 seventy one.25 NPT3/eight” *HF6 1577 eight.55 eight.19 8.19 seven.84 seven.forty eight seven.thirteen 6.forty one four.99 4.28 3.fifty six three.21 2.eighty five three.21 1.seventy eight  
GT240 sixteen fifty six.three NPT3/8″ *HF6 2116 six.76 six.forty seven six.forty seven six.19 5.91 five.sixty three 5.07 four.five 3.ninety four three.38 2.eighty two two.53 2.25 2.fourteen 1.ninety seven 1.forty one

Remark one) Maxium outlet force are at an air pushed strain of eight bar or 116 PSI ,for prolonged existence using

of such pump ,we recommend that air driven strain should be not far more than eight Bar 

Standard diagram of this sort of air driven liquid pumps 


Item Applications 


Manufacturing unit corners 


New Arrival Model: Gt Double Acting Pneumatic Chemical Liquid Pressure Booster Injection Pump