Introduction:
1. HS series slurry pump is developed for the constant pumping of substantial abrasive, higher density slurries with minimum upkeep requirements. The wearing elements are manufactured of ultra chrome or and rubber. It will preserve higher effectiveness over the dress in life of its parts.
2. The metal moist parts and rubber ones can be interchangeable for dealing with different liquids or slurries.
3. HS slurry pumps are available in measurements ranging from one inch to 18 inch discharge and characteristic higher performance performance able of movement charges from ten.eight to 5400 m³/h and heads up to 125 meters for large head types.
Functions:
one. Cylindrical composition of bearing assembly: convenient to alter the space amongst impeller and entrance liner
and can beremoved fully
two. Interchangeable anti-abrasive moist parts created of high-chrome alloys
three. Casing halves of ductile iron with exterior reinforcing ribs offer substantial working pressure abilities
and an further evaluate of basic safety.
4. The discharge department can be oriented to any eight positions at the interval of forty five degrees
5. Numerous travel types: DC(immediate link), V-belt drive, equipment box reducer, hydraulic couplings, VFD,
SCR manage, and so forth
six. The shaft seal makes use of the packing seal, expeller seal and mechanical seal
Normal Software:
• CZPT processing | • CZPT | • Coal Washery | • Cyclone feeds |
• Bentonite | • CZPT slurry | • Tailing | • Mill grinding |
• Ash handing | • Tunnel | • Squander sludge | • Coarse sand |
• Lime mud | • Phosphoric acid | • Dredging | • CZPT |
• Alumina CZPT | • Electrical power Plant | • Potash Fertilizer Plant | • Other industries |
• Iron ore sand | • Copper Focus | • Gold mine | •Molybdenum |
Model | Max Electrical power (Kw) |
Inlet & Outlet size (inch) | Material for Wear Parts | Flow Charge (Q) | Head (H) meter |
Velocity (RPM) |
Impeller Dia. (mm) |
|
m³/hr | l/s | |||||||
25HS-B | fifteen | 1.five/1 | M | 12.six~28.eight | 3.5~8 | six~68 | 1200~3800 | 152 |
R | ten.eight~25.2 | three~7 | seven~fifty two | 1400~3400 | 152 | |||
40HS-B | fifteen | two/1.five | M | 32.4~72 | nine~20 | 6~58 | 1200~3200 | 184 |
R | twenty five.two~54 | 7~fifteen | 5.5~forty one | 1000~2600 | 178 | |||
50HS-C | 30 | 3/2 | M | 39.6~86.four | 11~24 | 12~64 | 1300~2700 | 214 |
R | 36~75.six | ten~21 | 13~46 | 1300~2300 | 213 | |||
75HS-C | 30 | four/three | M | 86.four~198 | 24~55 | nine~52 | 1000~2200 | 245 |
R | seventy nine.two~one hundred eighty | 22~fifty | 5~34.five | 800~1800 | 245 | |||
100HS-D | sixty | 6/4 | M | 162~360 | forty~one hundred | twelve~fifty six | 800~1550 | 365 |
R | a hundred and forty four~324 | forty~ninety | twelve~45 | 800~1350 | 365 | |||
150HS-E | 120 | eight/6 | M | 360~828 | one hundred~230 | ten~61 | 500~1140 | 510 |
R | 324~720 | ninety~200 | seven~49 | 400~1000 | 510 | |||
200MS-E | a hundred and twenty | ten/8 | M | 666~1440 | 185~400 | 14~60 | 600~1100 | 549 |
200HS-ST | 560 | 10/8 | M | 612~1368 | a hundred and seventy~380 | eleven~61 | four hundred~850 | 686 |
R | 540~1188 | a hundred and fifty~330 | 12~50 | 400~750 | 686 | |||
250HS-ST | 560 | twelve/ten | M | 936~1980 | 260~550 | 7~sixty eight | three hundred~800 | 762 |
R | 720~1620 | two hundred~450 | seven~45 | 300~650 | 762 | |||
300HS-TU | 560 | 14/12 | M | 1260~2772 | 350~770 | 13~sixty three | three hundred~600 | 965 |
R | 1152~2520 | 320~seven-hundred | 13~44 | 300~500 | 965 | |||
350HS-TU | 1200 | 16/14 | M | 1368~3060 | 380~850 | 11~63 | 250~550 | 1067 |
450HS-TU | 1200 | 20/eighteen | M | 2520~5400 | seven hundred~1500 | 13~fifty seven | two hundred~400 | 1370 |
25HHS-C | 30 | one.5/one | M | 16.two~34.2 | 4.5~nine.five | twenty five~ninety two | 1400~2200 | 330 |
50HHS-D | sixty | three/two | M | sixty eight.four~136.8 | 19~38 | twenty five~87 | 850~1400 | 457 |
75HHS-E | a hundred and twenty | four/3 | M | 126~252 | 35~70 | twelve~97 | 600~1400 | 508 |
100HHS-E | one hundred twenty | six/four | M | 324~720 | ninety~200 | 30~118 | 600~1000 | 711 |
150HHS-S | 560 | 8/six | M | 468-1008 | one hundred thirty~280 | twenty~94 | 500~1000 | 711 |
For the substance of putting on elements,
“M” = steel, extremely chromium alloy “R” = anti-abrasive rubber
Speak to
Welcome to contact us any time for particulars.
Your inquiry will get our prompt consideration and reaction !