Downhole Motor for Directional Drilling
>>Merchandise Description
CZPT Parameter
Spec. | Suggested Gap Measurement | Input Flow Charge | Pressure Reduction | Little bit Speed | Doing work Torque | Hold off CZPT Torque | Output Electricity | Drilling Bodyweight | Max Drilling Weight | Joint Thread | Duration | ||
Device | mm | In | L/S | Mpa | r/min | N.m | N.m | KW | KN | KN | In | In | mm |
5LZ57×7. | eighty three-121 | 31/four-forty three/4 | one.5-three.5 | three.2 | 185-430 | 200 | 350 | 4.3-ten.one | five | ten | 11/2REG | eleven/2REG | 2822 |
5LZ73×7. | eighty three-121 | 31/four-43/four | 2-4 | three.2 | 80-160 | 615 | 1077 | 5.8-eleven.five | 12 | twenty five | 23/8REG | 23/8REG | 3423 |
9LZ89×7. | 105-143 | 41/8-55/eight | 3-8 | 3.2 | 147-392 | 504 | 882 | 8.sixty four-23 | twenty | 30 | 27/8REG | 27/8REG | 2911 |
5LZ95×7. | 114-one hundred fifty | 41/8-57/8 | five-12 | three.two | a hundred and forty-320 | 710 | 1240 | ten.5-25 | 21 | 40 | 27/8REG | 27/8REG | 3920 |
5LZ120×7. | 152-200 | 6-seventy seven/8 | 8-16 | three.2 | 80-a hundred and eighty | 1850 | 3200 | 23-47 | sixty four | 106 | 31/2REG | 31/2REG | 5039 |
5LZ165×7.0V | 245-244 | 81/eight-95/8 | 18-30 | three.2 | 111-167 | 4440 | 7770 | 57.6-86.four | 80 | a hundred and sixty | forty one/2REG | 41/2REG | 7408 |
5LZ165.5×7.0V | 215-244 | eighty one/8-95/8 | 18-30 | 4. | one hundred twenty-one hundred eighty | 5135 | 8987 | 72-108 | ninety | a hundred and eighty | forty one/2REG | forty one/2REG | 7748 |
5LZ172×7.0V | 215-244 | eighty one/eight-ninety five/8 | 18-30 | four. | 120-180 | 5135 | 8987 | seventy two-108 | ninety | a hundred and eighty | forty one/2REG | forty one/2REG | 7391 |
5LZ172.5×7.0V | 215-244 | eighty one/8-95/eight | 20-35 | 4. | one hundred fifteen-one hundred eighty | 6452 | 11299 | 86.four-151.2 | a hundred | two hundred | 41/2REG | 41/2REG | 8031 |
7LZ172.5×7.0V | 215-244 | 81/eight-95/eight | twenty-35 | 4. | seventy five-180 | 6527 | 11420 | fifty nine.five-108.six | 80 | one hundred sixty | 41/2REG | forty one/2REG | 8631 |
5LZ185×7. | 215-244 | 81/eight-ninety five/8 | twenty-35 | four. | 184 | 5436 | 8154 | eighty-140 | one hundred twenty | 240 | forty one/2REG | sixty one/2REG | 8120 |
5LZ185.5×7. | 215-244 | 81/8-95/8 | 20-35 | four. | 173 | 5939 | 8908 | eighty-one hundred forty | a hundred and twenty | 240 | 41/2REG | 61/2REG | 8120 |
5LZ197×7. | 244-311 | ninety one/8-one hundred twenty five/eight | twenty-40 | 3.two | 61-122 | 14118 | 14118 | 57.6-115.2 | a hundred and twenty | 240 | fifty one/2REG | 65/8REG | 7998 |
5LZ197.5×7. | 244-311 | 95/eight-121/4 | 20-40 | 4. | 85-160 | 12640 | 12640 | 72-one hundred forty four | a hundred thirty | 260 | fifty one/2REG | sixty five/8REG | 8598 |
7LZ203×7. | 244-311 | ninety five/8-121/4 | twenty-40 | three.two | 70-155 | 12289 | 12289 | fifty seven.six-126.7 | one hundred fifty | 240 | 51/2REG | 65/8REG | 7798 |
5LZ203.5×7. | 244-311 | 95/8-121/4 | twenty-40 | four. | 70-a hundred and fifty five | 8778 | 15362 | seventy two-158.four | a hundred and seventy | 260 | fifty one/2REG | sixty five/8REG | 8598 |
5LZ216×7. | 273-323 | 103/4-123/4 | 22-48 | 3.2 | 61-138 | 8895 | 15567 | 63.36-138.29 | one hundred ninety | three hundred | 65/8REG | 65/8REG | 7756 |
5LZ216.5×7. | 273-323 | 103/four-123/four | 22-forty eight | 4. | sixty one-138 | 11117 | 19455 | 79.two-172.8 | 238 | 378 | sixty five/8REG | sixty five/8REG | 8546 |
5LZ244×7. | 311-445 | 121/two-171/2 | fifty-75 | 3.2 | ninety one-136 | 15124 | 26468 | a hundred and forty four-216 | 200 | 360 | 65/8REG | 75/8REG | 8635 |
7LZ244.5×7. | 311-445 | 121/2-171/2 | 50-seventy five | 4. | ninety one-136 | 18905 | 33085 | 180-270 | 250 | 450 | sixty five/8REG | 75/8REG | 9235 |
Downhole motor
Down-hole motor is a positive-displacement motor. It converts high fluid electrical power into mechanical vitality of little bit rotation. Down-gap motor is commonly used for drilling, deflecting, azimuth handle, coring, reaming, side tracking drilling and workover for horizontal well, cluster wells and straight nicely of oilfields and coal mines. In addition, it is suitable for intricate drilling
Glorytek gives a variety of measurements of down-hole motors for gap dimensions from 1 7/eight” to 26″. Common measurements are 1 11/16″, 2 7/eight”, 3 1/eight”, 3 1/two”, 3 3/4″, 4″, 4 3/four”, five”, 5 5/16″,5 7/eight”, 6 1/4″, 6 1/2″, 6 3/4″, 7 1/4″, 7 3/4″, eight”,8 one/4″, 8 1/2″, 9″, 9 5/eight” and eleven 1/four”.
Glorytek is capable to offer down-gap motors of special dimension, large-pace, medium-speed and reduced-velocity, according to customer’s specifications
Downhole Motor Functioning Theory
Downhole motor is a kind of downhole dynamic drilling tool on the electricity of drilling mud. Mud stream from the outlet of mud pump flows through a by-move valve into the motor. This stream generates strain decline at both inlet and outlet of the pump, to thrust the rotor into rotating, and to transmit the torque and velocity on to the little bit. The downhole motor home mainly relies upon upon its property parameters.
Constitution of Downhole Motor
Downhole motor is composed of five assemblies of bearing, power area, coupling, anti-fall and bypass valve.
Characteristics
Features of Substantial Stream Charge Down-hole Motor | Features of Uniform Wall Thickness Down- gap Motor |
The adoption of hollow rotor cooperating with hard alloy jet nozzle of diverse measurements increases enter flow rate and proppant carrying capability. | This down-hole motor can properly resolve the dilemma of uneven thickness of motor’s rubber. Its traits are as follows: large stress enduring for one grade, big output energy, vast range of large efficiency, and many others. |
Features of Bent Angle Adjustable Down-hole Motor | Characteristics of In close proximity to Bit Down-gap Motor |
The bend angle of down-gap motor can be adjusted on wellhead. Stabilizers of distinct designs and measurements can be changed according to diverse requirements. | Measure position of measuring instrument is mounted in downhole motor, which is nearer to drilling little bit. Drill keep track of is a lot more accurate and reliable. |
Characteristics of Standard Down-gap Motor | Attributes of Saturated Saltwater Mud Resistant Down-gap Motor |
Regular electrical power segment the transmission shaft is lubricated by drilling fluid offered in vertical, solitary-bend and double-bend varieties optimum functioning temperature is 120°C. | The unique coating layer of rotor has stronger capability of corrosion and use resistance, enabling down-hole motors to perform a long time in saturated saltwater mud. |
Features of Oil-sealed Transmission Shaft Down-hole Motor | Functions of Higher Temperature Resistant Down-hole Motor |
The working atmosphere of thrust bearing and radial bearing is improved, and the functioning time of down-hole motor throughout one particular one trip is enhanced. | The stator is equipped with superior good quality higher temperature resistant rubber, which allows down-gap motor to perform stably for a long time underneath the hole where temperature even reaches 150°C and180°C. |
Functions of Extended Down-hole Motor | Features of Substantial Deflection Down-gap Motor |
The torque is elevated by thirty% to sixty% when compared with CZPT down-gap motors the transmission shaft is lubricated by drilling fluid available in vertical, solitary- bend and double-bend kinds greatest working temperature: 120°C. | The exclusive construction helps make the motor shorter, the bending position nearer to drill bit, and higher build-up rate. |
Related CZPT
>> Packing and Transport
Packing: Common packing.
Delivery: Usually twenty days soon after your payment.
>> Company Profile
Glorytek CZPT (ZheJiang )Co.,Ltd.,
positioned in ZheJiang , China, is an integrated corporation specialized in production and exporting prime high quality drilling products and drilling elements for decades. We are supported and assisted by a highly seasoned crew of designers and engineers that permit us to total all the assigned initiatives effectively as per the specified prerequisite from our customers.
Our merchandise are extensively utilized in the scope of mining, water effectively drilling and exploration, anchor grouting project, side slope defense engineering, oil and gasoline engineering,underwater rock drilling & blasting operations of seaport channel, hydropower undertaking, countrywide protection projects ect.
>> Certifications
>> Latest Exhibition
>> Buyer Photos
>> Soon after-sale Guarantee
(1) Free alter when the difficulty caused by the high quality concern.
(two) Well timed after-sale assistance shall be presented all the time.
>> FAQ
Q: Are you CZPT producer or investing company?
A: We are an built-in corporation specialised in production and exporting.
Q: Can you source connected drilling equipment?
A: Indeed, we can offer entire set of drilling tools, such as drill pipe, tricone little bit, PDC bit, drag little bit, DTH Hammer. Additionally, we
have drilling equipments like rigs, mud pump, CZPT, etc. as nicely.
Q: Which payment conditions can you accept?
A: Typically we desire thirty% progress payment following purchase buy by T/T, 70% remaining payment before shipping by T/T. And 100% progress payment soon after purchase order by T/T for small orders.
Q: How is your shipping time?
A: This will count on your buying quantity. Normally it will be close to twenty times following we get your payment.
Q: How can you ensure the quality?
A: We have our professional QC team and all the products will be rigorous inspection and screening for every single purchase just before shipping and delivery out.
>> Get in touch with Us
Jane Cheng
Revenue Representative
Glorytek CZPT ( ZheJiang ) Co., Ltd.
Tackle:No.B-2507, Xihu (West Lake) Dis.WeiCheng, GuanZhuang,Chao Yang District, ZheJiang , China.
Tel: -10-52864265/52864786
Fax: -10-5257170
Cellular:-13426425710
Internet site: