OG-Series
This sequence of pump makes use of solitary pneumatic non-equilibrium fuel distributing valves to move to and fro immediately. The push areas of the pump are manufactured of aluminum alloy. These components are dealt with with oxidation into black to make sure their excellent-seeking look and stainless efficiency.
The fluid getting in contact with areas are produced of carbon steel or stainless metal in accordance to various media. The entire established of sealing areas is imported, to making certain pumps’ performances. The diameter of travel piston is 100mm. The maximum travel strain is 10bar. We propose buyers use air pressure≤8bar to make sure lengthy lifespan of the pump.
CZPT parameters
Variety |
Strain ratio |
Outlet force |
Circulation 1/Min |
Connections |
Internet fat KG |
|||
bar |
psi |
CZPT port |
Inlet |
Outlet |
||||
OG6 |
6:one |
forty eight |
696 |
27.74 |
G1/two |
G3/four |
ZG1/two |
twelve.seven |
OG10 |
10:one |
80 |
1160 |
one eight.5 3 |
G1/two |
G3/four |
ZG1/two |
12.7 |
OG16 |
sixteen:one |
128 |
1856 |
1 two.86 |
G1/two |
G3/4 |
ZG1/two |
12.seven |
OG28 |
28:1 |
2 24 |
3248 |
7.24 |
G1/2 |
ZG1/two |
ZG3/eight |
12.two |
OG40 |
40:one |
3 20 |
4640 |
5.02 |
G1/two |
ZG1/2 |
ZG3/eight |
twelve.2 |
OG64 |
sixty four:one |
512 |
7424 |
three.21 |
G1/2 |
ZG1/2 |
ZG3/8 |
12.2 |
OG80 |
eighty:one |
640 |
9280 |
two.44 |
G1/two |
ZG1/two |
ZG3/eight |
twelve.2 |
OG100 |
one hundred:one |
800 |
11600 |
1.81 |
G1/two |
ZG1/2 |
M14X1.5 |
12 |
OG130 |
a hundred thirty:one |
1040 |
a hundred and fifty eighty |
one.36 |
G1/two |
ZG1/2 |
M14X1.five |
12 |
OG175 |
175:1 |
1400 |
twenty? |
one.14 |
G1/2 |
ZG1/2 |
M14X1.5 |
twelve |
OG255 |
255:one |
2040 |
295 eighty |
.77 |
G1/2 |
ZG3/8 |
M14X1.5 |
twelve |
OG400 |
four hundred:1 |
3200 |
46400 |
.fifty one |
G1/2 |
ZG3/8 |
M14X1.five |
12 |
*The earlier mentioned flow is achieved when the generate air strain is 6bar.
* Pressure ratio is pushed surface area/driving floor.
*Static outlet pressure (calculated and highest permitted)at an air push force of eight bar (116 psi).
*The minimal air generate pressure to start off the pump is 3bar (43.five psi). Based on the strain ratio a specific outlet pressure can be achieved.