Tag Archives: application

China Best Sales Clamping Application Xd-100c 2.2kw 100m3/H Rotary Vane Vacuum Pump vacuum pump ac system

Product Description

Product Description

Rotary vane vacuum pump mainly consists of pump body, rotor, rotary vane, end cap, oil tank and so on. A rotor with 3 vanes is mounted eccentrically in a cylindrical housing, the 3 vanes slide in the rotor slots. When rotating, the centrifugal force keeps the vanes in contact with the housing and the rotation drives the rotor to slide along the housing.

1.Exhaust porti nterface 2.Exhaust filter 3.Suction valve
4.Oil level gauge 5.Drain valve  6.Filler plug
7.Exhaust valve 8.Blade 9.Rotor
10.Tank 11.Axial fan 12.Motor 
13.Oil filter 14.Suction port interface 15.Air ballast valve
16.Radiator tube 17.Return valve  

Working principle

The diagram below shows the structure of the pump. When the rotor rotates, the vanes, the housing and the 2 end caps form three chambers, every turn, the volume of each chamber increases or decreases due to the sliding of the vanes, completing the suction and discharge process.

Main features

  1. Able to work continuously for a long time under the inlet pressure of 5×104Pa.
  2.  Low noise, low vibration, foot bolts is not required.
  3. Exhaust filter in the pump effectively separates the oil in the gas to avoid pollution of the environment.
  4. Directly driven by motor.
  5. Compact structure, light weight, air-cooled.
  6. Easy to operate, install and maintain.

Applications

The rotary vane vacuum pump is suitable for the applications where the requirement of vacuum is not high and the operation is reliable and maintenance is convenient. It is commonly used in vacuum packaging of various foodstuffs, vacuum forming of rubber and plastic industry, paper transmission of printing industry, vacuum impregnation and leakage prevention of various castings, vacuum fixture, vacuum drying, vacuum filtration, and hospital surgery.

Product Parameters

 

Model Nominal pumping speed(50Hz)
 m³/h
Ultimate pressure
 ≤Pa
Ultimate pressure with Gas Ballast valve on ≤Pa Nominal motor rating (50Hz)   kw         Nominal motor speed  (50Hz) RPM  Water vapour capacity
 kg/h
Noise level   db(A) Oil capacity
 L
Working Temperature
ºC
Suction Connection size
 inch
Discharge Connection size
 inch
Weight
kg
XD-571 10 200   0.37 2800 0.4 62 0.5 77 G1/2″ G1/2″ 16
XD-571 20 200   0.75 2880 0.4 63 0.5 77 G1/2″ G1/2″ 18
XD-571A 20 200   0.75 2880 0.4 63 0.5 77 G1/2″ G1/2″ 18
XD-571C 20 200   0.9 2880 0.4 65 0.5 79 G3/4″ G3/4″ 20
XD-571 25 200   0.75 2880 0.4 65 0.5 79 G3/4″ G3/4″ 20
XD-040C 40 50 200 1.1 1500 0.6 64 1.25 76 G1 1/4″ G1 1/4″ 48
XD-063C 63 50 200 1.5/2.2 1500 1 65 2 79 G1 1/4″ G1 1/4″ 58
XD-063D 63 50 200 1.5 1500 0.6 65 1.5 79 G1 1/4″ G1 1/4″ 49
XD-100C 100 50 200 2.2/3 1500 1.5 66 2 79 G1 1/4″ G1 1/4″ 72
XD-160C 160 50 200 4 1500 2.5 71 5 70 G2″ G2″ 158
XD-202C 200 50 200 4 1500 4 73 5 70 G2″ G2″ 158
XD-250C 250 50 200 5.5 1500 4.5 73 7 73 G2″ G2″ 195
XD-302C 300 50 200 5.5/7.5 1500 5 75 7 75 G2″ G2″ 211

Dimensional drawing

 

 

Our factory

 

FAQ

Q: What information should I offer for an inquiry?
A: You can inquire based on the model directly, but it is always recommended that you contact us so that we can help you to check if the pump is the most appropriate for your application.

Q: Can you make a customized vacuum pump?
A: Yes, we can do some special designs to meet customer applications. Such as customized sealing systems, speical surface treatment can be applied for roots vacuum pump and screw vacuum pump. Please contact us if you have special requirements. 

Q: I have problems with our vacuum pumps or vacuum systems, can you offer some help?
A: We have application and design engineers with more than 30 years of experience in vacuum applications in different industries and help a lot of customers resolve their problems, such as leakage issues, energy-saving solutions, more environment-friendly vacuum systems, etc. Please contact us and we’ll be very happy if we can offer any help to your vacuum system.

Q: Can you design and make customized vacuum systems?
A: Yes, we are good for this.

Q: What is your MOQ?
A: 1 piece or 1 set.

Q: How about your delivery time?
A: 5-10 working days for the standard vacuum pump if the quantity is below 20 pieces, 20-30 working days for the conventional vacuum system with less than 5 sets. For more quantity or special requirements, please contact us to check the lead time.

Q: What are your payment terms?
A: By T/T, 50% advance payment/deposit and 50% paid before shipment.

Q: How about the warranty?
A: We offer 1-year warranty (except for the wearing parts).

Q: How about the service?
A: We offer remote video technical support. We can send the service engineer to the site for some special requirements.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: Online Video Instruction
Warranty: 1 Year
Oil or Not: Oil
Structure: Rotary Vacuum Pump
Exhauster Method: Positive Displacement Pump
Nominal Pumping Speed(50Hz): 100m3/H

vacuum pump

How Are Vacuum Pumps Employed in the Production of Electronic Components?

Vacuum pumps play a crucial role in the production of electronic components. Here’s a detailed explanation:

The production of electronic components often requires controlled environments with low or no atmospheric pressure. Vacuum pumps are employed in various stages of the production process to create and maintain these vacuum conditions. Here are some key ways in which vacuum pumps are used in the production of electronic components:

1. Deposition Processes: Vacuum pumps are extensively used in deposition processes, such as physical vapor deposition (PVD) and chemical vapor deposition (CVD), which are commonly employed for thin film deposition on electronic components. These processes involve the deposition of materials onto substrates in a vacuum chamber. Vacuum pumps help create and maintain the necessary vacuum conditions required for precise and controlled deposition of the thin films.

2. Etching and Cleaning: Etching and cleaning processes are essential in the fabrication of electronic components. Vacuum pumps are used to create a vacuum environment in etching and cleaning chambers, where reactive gases or plasmas are employed to remove unwanted materials or residues from the surfaces of the components. The vacuum pumps help evacuate the chamber and ensure the efficient removal of byproducts and waste gases.

3. Drying and Bake-out: Vacuum pumps are utilized in the drying and bake-out processes of electronic components. After wet processes, such as cleaning or wet etching, components need to be dried thoroughly. Vacuum pumps help create a vacuum environment that facilitates the removal of moisture or solvents from the components, ensuring their dryness before subsequent processing steps. Additionally, vacuum bake-out is employed to remove moisture or other contaminants trapped within the components’ materials or structures, enhancing their reliability and performance.

4. Encapsulation and Packaging: Vacuum pumps are involved in the encapsulation and packaging stages of electronic component production. These processes often require the use of vacuum-sealed packaging to protect the components from environmental factors such as moisture, dust, or oxidation. Vacuum pumps assist in evacuating the packaging materials, creating a vacuum-sealed environment that helps maintain the integrity and longevity of the electronic components.

5. Testing and Quality Control: Vacuum pumps are utilized in testing and quality control processes for electronic components. Some types of testing, such as hermeticity testing, require the creation of a vacuum environment for evaluating the sealing integrity of electronic packages. Vacuum pumps help evacuate the testing chambers, ensuring accurate and reliable test results.

6. Soldering and Brazing: Vacuum pumps play a role in soldering and brazing processes for joining electronic components and assemblies. Vacuum soldering is a technique used to achieve high-quality solder joints by removing air and reducing the risk of voids, flux residuals, or oxidation. Vacuum pumps assist in evacuating the soldering chambers, creating the required vacuum conditions for precise and reliable soldering or brazing.

7. Surface Treatment: Vacuum pumps are employed in surface treatment processes for electronic components. These processes include plasma cleaning, surface activation, or surface modification techniques. Vacuum pumps help create the necessary vacuum environment where plasma or reactive gases are used to treat the component surfaces, improving adhesion, promoting bonding, or altering surface properties.

It’s important to note that different types of vacuum pumps may be used in electronic component production, depending on the specific process requirements. Commonly used vacuum pump technologies include rotary vane pumps, turbo pumps, cryogenic pumps, and dry pumps.

In summary, vacuum pumps are essential in the production of electronic components, facilitating deposition processes, etching and cleaning operations, drying and bake-out stages, encapsulation and packaging, testing and quality control, soldering and brazing, as well as surface treatment. They enable the creation and maintenance of controlled vacuum environments, ensuring precise and reliable manufacturing processes for electronic components.

vacuum pump

Considerations for Selecting a Vacuum Pump for Cleanroom Applications

When it comes to selecting a vacuum pump for cleanroom applications, several considerations should be taken into account. Here’s a detailed explanation:

Cleanrooms are controlled environments used in industries such as semiconductor manufacturing, pharmaceuticals, biotechnology, and microelectronics. These environments require strict adherence to cleanliness and particle control standards to prevent contamination of sensitive processes or products. Selecting the right vacuum pump for cleanroom applications is crucial to maintain the required level of cleanliness and minimize the introduction of contaminants. Here are some key considerations:

1. Cleanliness: The cleanliness of the vacuum pump is of utmost importance in cleanroom applications. The pump should be designed and constructed to minimize the generation and release of particles, oil vapors, or other contaminants into the cleanroom environment. Oil-free or dry vacuum pumps are commonly preferred in cleanroom applications as they eliminate the risk of oil contamination. Additionally, pumps with smooth surfaces and minimal crevices are easier to clean and maintain, reducing the potential for particle buildup.

2. Outgassing: Outgassing refers to the release of gases or vapors from the surfaces of materials, including the vacuum pump itself. In cleanroom applications, it is crucial to select a vacuum pump with low outgassing characteristics to prevent the introduction of contaminants into the environment. Vacuum pumps specifically designed for cleanroom use often undergo special treatments or use materials with low outgassing properties to minimize this effect.

3. Particle Generation: Vacuum pumps can generate particles due to the friction and wear of moving parts, such as rotors or vanes. These particles can become a source of contamination in cleanrooms. When selecting a vacuum pump for cleanroom applications, it is essential to consider the pump’s particle generation level and choose pumps that have been designed and tested to minimize particle emissions. Pumps with features like self-lubricating materials or advanced sealing mechanisms can help reduce particle generation.

4. Filtration and Exhaust Systems: The filtration and exhaust systems associated with the vacuum pump are critical for maintaining cleanroom standards. The vacuum pump should be equipped with efficient filters that can capture and remove any particles or contaminants generated during operation. High-quality filters, such as HEPA (High-Efficiency Particulate Air) filters, can effectively trap even the smallest particles. The exhaust system should be properly designed to ensure that filtered air is released outside the cleanroom or passes through additional filtration before being reintroduced into the environment.

5. Noise and Vibrations: Noise and vibrations generated by vacuum pumps can have an impact on cleanroom operations. Excessive noise can affect the working environment and compromise communication, while vibrations can potentially disrupt sensitive processes or equipment. It is advisable to choose vacuum pumps specifically designed for quiet operation and that incorporate measures to minimize vibrations. Pumps with noise-dampening features and vibration isolation systems can help maintain a quiet and stable cleanroom environment.

6. Compliance with Standards: Cleanroom applications often have specific industry standards or regulations that must be followed. When selecting a vacuum pump, it is important to ensure that it complies with relevant cleanroom standards and requirements. Considerations may include ISO cleanliness standards, cleanroom classification levels, and industry-specific guidelines for particle count, outgassing levels, or allowable noise levels. Manufacturers that provide documentation and certifications related to cleanroom suitability can help demonstrate compliance.

7. Maintenance and Serviceability: Proper maintenance and regular servicing of vacuum pumps are essential for their reliable and efficient operation. When choosing a vacuum pump for cleanroom applications, consider factors such as ease of maintenance, availability of spare parts, and access to service and support from the manufacturer. Pumps with user-friendly maintenance features, clear service instructions, and a responsive customer support network can help minimize downtime and ensure continued cleanroom performance.

In summary, selecting a vacuum pump for cleanroom applications requires careful consideration of factors such as cleanliness, outgassing characteristics, particle generation, filtration and exhaust systems, noise and vibrations, compliance with standards, and maintenance requirements. By choosing vacuum pumps designed specifically for cleanroom use and considering these key factors, cleanroom operators can maintain the required level of cleanliness and minimize the risk of contamination in their critical processes and products.

vacuum pump

What Is the Purpose of a Vacuum Pump in an HVAC System?

In an HVAC (Heating, Ventilation, and Air Conditioning) system, a vacuum pump serves a crucial purpose. Here’s a detailed explanation:

The purpose of a vacuum pump in an HVAC system is to remove air and moisture from the refrigerant lines and the system itself. HVAC systems, particularly those that rely on refrigeration, operate under specific pressure and temperature conditions to facilitate the transfer of heat. To ensure optimal performance and efficiency, it is essential to evacuate any non-condensable gases, air, and moisture from the system.

Here are the key reasons why a vacuum pump is used in an HVAC system:

1. Removing Moisture: Moisture can be present within an HVAC system due to various factors, such as system installation, leaks, or improper maintenance. When moisture combines with the refrigerant, it can cause issues like ice formation, reduced system efficiency, and potential damage to system components. A vacuum pump helps remove moisture by creating a low-pressure environment, which causes the moisture to boil and turn into vapor, effectively evacuating it from the system.

2. Eliminating Air and Non-Condensable Gases: Air and non-condensable gases, such as nitrogen or oxygen, can enter an HVAC system during installation, repair, or through leaks. These gases can hinder the refrigeration process, affect heat transfer, and decrease system performance. By using a vacuum pump, technicians can evacuate the air and non-condensable gases, ensuring that the system operates with the designed refrigerant and pressure levels.

3. Preparing for Refrigerant Charging: Prior to charging the HVAC system with refrigerant, it is crucial to create a vacuum to remove any contaminants and ensure the system is clean and ready for optimal refrigerant circulation. By evacuating the system with a vacuum pump, technicians ensure that the refrigerant enters a clean and controlled environment, reducing the risk of system malfunctions and improving overall efficiency.

4. Leak Detection: Vacuum pumps are also used in HVAC systems for leak detection purposes. After evacuating the system, technicians can monitor the pressure to check if it holds steady. A significant drop in pressure indicates the presence of leaks, enabling technicians to identify and repair them before charging the system with refrigerant.

In summary, a vacuum pump plays a vital role in an HVAC system by removing moisture, eliminating air and non-condensable gases, preparing the system for refrigerant charging, and aiding in leak detection. These functions help ensure optimal system performance, energy efficiency, and longevity, while also reducing the risk of system malfunctions and damage.

China Best Sales Clamping Application Xd-100c 2.2kw 100m3/H Rotary Vane Vacuum Pump   vacuum pump ac system	China Best Sales Clamping Application Xd-100c 2.2kw 100m3/H Rotary Vane Vacuum Pump   vacuum pump ac system
editor by Dream 2024-05-02

China Good quality Screw Vacuum Pump Cheap Factory Direct Sales Screw Dry Oil Free Vacuum Pump Application Industrial Boilers · Pressure High Pressure with Hot selling

Product Description

                                       EXTERIOR DESIGN                                                                INTERIOR DESIGN

ZheJiang CHINAMFG Machinery Manufacturing Co. , Ltd. is located in HangZhou, ZheJiang .CHINAMFG is a comprehensive screw air compressor

manufacturer that engaged in R & D, design, production and sales. It has a plant of 20,000 square meters, including a large production workshop,

a comprehensive first-class exhibition hall and a testing laboratory.

Dukas has excellent mechanical engineering designers, an experienced staff team and a professional management team. The production

concept focuses on energy-saving and is committed to perfecting and improving the technological process in order to get the core technology

of super frequency energy-saving, achieving the characteristics of mute, durability, power saving and safety.

The company has 9 series of products with multiple models. Including Fixed speed air compressor, PM VSD air compressor, PM VSD

two-stage air compressor, 4-in-1 air compressor, Oil free water lubrcating air compressor, Diesel portable screw air compressor, Electric

portable screw air compressor, Air dryer, Adsorption machine and the matching spare parts. CHINAMFG adheres to the business philosophy of

cooperation and mutual benefit to provide a one-stop service for every customer!

Dukas air compressors not only cover the domestic market but also are exported to more than 20 countries and regions such as South

Africa, Australia, Thailand, Russia, Argentina, Canada and so on. CHINAMFG products have won a good reputation from users for their excellent

quality and style. The company has always adhered to the concept of quality first, service first and dedication to providing every customer with

excellent products and meticulous after-sales service!

Dukas warmly welcome customers to visit our factory and establish a wide range of cooperation!

Frequency Asked Question:

Q1: Are you factory or trade company?  
A1: We are factory.

Q2: What the exactly address of your factory? 
A2: Our Factory is Located in Xihu (West Lake) Dis. CountyHangZhou CityZheJiang  Province, China.

Q3: Will you provide spare parts of your products? 
A3: Yes, We provide all parts to customer, so you can do repair or maintenance without trouble.

Q4: Can you accept OEM orders? 
A4: Yes, with professional design team, OEM orders are highly welcome.

Q5: How long will you take to arrange production?
A5: Immediate delivery for stock products.380V 50HZ we can delivery the goods within 3-15 days. Other voltage or other color we will delivery within 25-30 days.

Q6: Warranty terms of your machine?
A6Two years warranty for the machine and technical support always according to your needs.

Q7: Can you provide the best price?
A7:According to your order, we will provide you the best price.

After-sales Service: 24 Hours
Warranty: 1 Year, 2 Year
Lubrication Style: Lubricated
Cooling System: Air Cooling
Power Source: AC Power
Cylinder Position: Horizontal
Customization:
Available

|

vacuum pump

What Is the Impact of Altitude on Vacuum Pump Performance?

The performance of vacuum pumps can be influenced by the altitude at which they are operated. Here’s a detailed explanation:

Altitude refers to the elevation or height above sea level. As the altitude increases, the atmospheric pressure decreases. This decrease in atmospheric pressure can have several effects on the performance of vacuum pumps:

1. Reduced Suction Capacity: Vacuum pumps rely on the pressure differential between the suction side and the discharge side to create a vacuum. At higher altitudes, where the atmospheric pressure is lower, the pressure differential available for the pump to work against is reduced. This can result in a decrease in the suction capacity of the vacuum pump, meaning it may not be able to achieve the same level of vacuum as it would at lower altitudes.

2. Lower Ultimate Vacuum Level: The ultimate vacuum level, which represents the lowest pressure that a vacuum pump can achieve, is also affected by altitude. As the atmospheric pressure decreases with increasing altitude, the ultimate vacuum level that can be attained by a vacuum pump is limited. The pump may struggle to reach the same level of vacuum as it would at sea level or lower altitudes.

3. Pumping Speed: Pumping speed is a measure of how quickly a vacuum pump can remove gases from a system. At higher altitudes, the reduced atmospheric pressure can lead to a decrease in pumping speed. This means that the vacuum pump may take longer to evacuate a chamber or system to the desired vacuum level.

4. Increased Power Consumption: To compensate for the decreased pressure differential and achieve the desired vacuum level, a vacuum pump operating at higher altitudes may require higher power consumption. The pump needs to work harder to overcome the lower atmospheric pressure and maintain the necessary suction capacity. This increased power consumption can impact energy efficiency and operating costs.

5. Efficiency and Performance Variations: Different types of vacuum pumps may exhibit varying degrees of sensitivity to altitude. Oil-sealed rotary vane pumps, for example, may experience more significant performance variations compared to dry pumps or other pump technologies. The design and operating principles of the vacuum pump can influence its ability to maintain performance at higher altitudes.

It’s important to note that vacuum pump manufacturers typically provide specifications and performance curves for their pumps based on standardized conditions, often at or near sea level. When operating a vacuum pump at higher altitudes, it is advisable to consult the manufacturer’s guidelines and consider any altitude-related limitations or adjustments that may be necessary.

In summary, the altitude at which a vacuum pump operates can have an impact on its performance. The reduced atmospheric pressure at higher altitudes can result in decreased suction capacity, lower ultimate vacuum levels, reduced pumping speed, and potentially increased power consumption. Understanding these effects is crucial for selecting and operating vacuum pumps effectively in different altitude environments.

vacuum pump

How Do Vacuum Pumps Assist in Freeze-Drying Processes?

Freeze-drying, also known as lyophilization, is a dehydration technique used in various industries, including pharmaceutical manufacturing. Vacuum pumps play a crucial role in facilitating freeze-drying processes. Here’s a detailed explanation:

During freeze-drying, vacuum pumps assist in the removal of water or solvents from pharmaceutical products while preserving their structure and integrity. The freeze-drying process involves three main stages: freezing, primary drying (sublimation), and secondary drying (desorption).

1. Freezing: In the first stage, the pharmaceutical product is frozen to a solid state. Freezing is typically achieved by lowering the temperature of the product below its freezing point. The frozen product is then placed in a vacuum chamber.

2. Primary Drying (Sublimation): Once the product is frozen, the vacuum pump creates a low-pressure environment within the chamber. By reducing the pressure, the boiling point of water or solvents present in the frozen product is lowered, allowing them to transition directly from the solid phase to the vapor phase through a process called sublimation. Sublimation bypasses the liquid phase, preventing potential damage to the product’s structure.

The vacuum pump maintains a low-pressure environment by continuously removing the water vapor or solvent vapor generated during sublimation. The vapor is drawn out of the chamber, leaving behind the freeze-dried product. This process preserves the product’s original form, texture, and biological activity.

3. Secondary Drying (Desorption): After the majority of the water or solvents have been removed through sublimation, the freeze-dried product may still contain residual moisture or solvents. In the secondary drying stage, the vacuum pump continues to apply vacuum to the chamber, but at a higher temperature. The purpose of this stage is to remove the remaining moisture or solvents through evaporation.

The vacuum pump maintains the low-pressure environment, allowing the residual moisture or solvents to evaporate at a lower temperature than under atmospheric pressure. This prevents potential thermal degradation of the product. Secondary drying further enhances the stability and shelf life of the freeze-dried pharmaceutical product.

By creating and maintaining a low-pressure environment, vacuum pumps enable efficient and controlled sublimation and desorption during the freeze-drying process. They facilitate the removal of water or solvents while minimizing the potential damage to the product’s structure and preserving its quality. Vacuum pumps also contribute to the overall speed and efficiency of the freeze-drying process by continuously removing the vapor generated during sublimation and evaporation. The precise control provided by vacuum pumps ensures the production of stable and high-quality freeze-dried pharmaceutical products.

vacuum pump

Can Vacuum Pumps Be Used in Food Processing?

Yes, vacuum pumps are widely used in food processing for various applications. Here’s a detailed explanation:

Vacuum pumps play a crucial role in the food processing industry by enabling the creation and maintenance of vacuum or low-pressure environments. They offer several benefits in terms of food preservation, packaging, and processing. Here are some common applications of vacuum pumps in food processing:

1. Vacuum Packaging: Vacuum pumps are extensively used in vacuum packaging processes. Vacuum packaging involves removing air from the packaging container to create a vacuum-sealed environment. This process helps extend the shelf life of food products by inhibiting the growth of spoilage-causing microorganisms and reducing oxidation. Vacuum pumps are used to evacuate the air from the packaging, ensuring a tight seal and maintaining the quality and freshness of the food.

2. Freeze Drying: Vacuum pumps are essential in freeze drying or lyophilization processes used in food processing. Freeze drying involves removing moisture from food products while they are frozen, preserving their texture, flavor, and nutritional content. Vacuum pumps create a low-pressure environment that allows frozen water to directly sublimate from solid to vapor, resulting in the removal of moisture from the food without causing damage or loss of quality.

3. Vacuum Cooling: Vacuum pumps are utilized in vacuum cooling processes for rapid and efficient cooling of food products. Vacuum cooling involves placing the food in a vacuum chamber and reducing the pressure. This lowers the boiling point of water, facilitating the rapid evaporation of moisture and heat from the food, thereby cooling it quickly. Vacuum cooling helps maintain the freshness, texture, and quality of delicate food items such as fruits, vegetables, and bakery products.

4. Vacuum Concentration: Vacuum pumps are employed in vacuum concentration processes in the food industry. Vacuum concentration involves removing excess moisture from liquid food products to increase their solids content. By creating a vacuum, the boiling point of the liquid is reduced, allowing for gentle evaporation of water while preserving the desired flavors, nutrients, and viscosity of the product. Vacuum concentration is commonly used in the production of juices, sauces, and concentrates.

5. Vacuum Mixing and Deaeration: Vacuum pumps are used in mixing and deaeration processes in food processing. In the production of certain food products such as chocolates, confectioneries, and sauces, vacuum mixing is employed to remove air bubbles, achieve homogeneity, and improve product texture. Vacuum pumps aid in the removal of entrapped air and gases, resulting in smooth and uniform food products.

6. Vacuum Filtration: Vacuum pumps are utilized in food processing for vacuum filtration applications. Vacuum filtration involves separating solids from liquids or gases using a filter medium. Vacuum pumps create suction that draws the liquid or gas through the filter, leaving behind the solid particles. Vacuum filtration is commonly used in processes such as clarifying liquids, removing impurities, and separating solids from liquids in the production of beverages, oils, and dairy products.

7. Marinating and Brining: Vacuum pumps are employed in marinating and brining processes in the food industry. By applying a vacuum to the marinating or brining container, the pressure is reduced, allowing the marinade or brine to penetrate the food more efficiently. Vacuum marinating and brining help enhance flavor absorption, reduce marinating time, and improve the overall taste and texture of the food.

8. Controlled Atmosphere Packaging: Vacuum pumps are used in controlled atmosphere packaging (CAP) systems in the food industry. CAP involves modifying the gas composition within food packaging to extend the shelf life and maintain the quality of perishable products. Vacuum pumps aid in the removal of oxygen or other unwanted gases from the package, allowing the introduction of a desired gas mixture that preserves the food’s freshness and inhibits microbial growth.

These are just a few examples of how vacuum pumps are used in food processing. The ability to create and control vacuum or low-pressure environments is a valuable asset in preserving food quality, enhancing shelf life, and facilitating various processing techniques in the food industry.

China Good quality Screw Vacuum Pump Cheap Factory Direct Sales Screw Dry Oil Free Vacuum Pump Application Industrial Boilers · Pressure High Pressure   with Hot selling	China Good quality Screw Vacuum Pump Cheap Factory Direct Sales Screw Dry Oil Free Vacuum Pump Application Industrial Boilers · Pressure High Pressure   with Hot selling
editor by CX 2023-12-04

High Precision Plunger Pump for Diagnostic Application

High Precision Plunger Pump for Diagnostic Application

1. Creation Overview
The 50XX-P collection is a family of precision piston pumps which offers precise sampling and reagent dispensing. With higher aspirating and drainage precision, this collection pump is a large functionality, missing value and upkeep free of charge precision piston pump and its daily life time can be far more than 5 million cycles without influencing the precision and accuracy. Piston pump has already been broadly used in medical and laboratory analytical instruments.
one.one. Characteristics Of 50XX-P Piston Pump
Nominal dispense volume:100ul~5ml, multiple types for selection.
Inside the existence cycle of pump, they have a substantial security liquid quantitative precision. When screening medium is deionized h2o, the CV benefit as the pursuing desk: Share of liquid aspiration amongst complete capability CV (Coefficient of variation)
2%
<1.5%
>10%
<0.5%
A entire take away for cylinder:twelve.7mm
CZPT technology to approach zirconia ceramics cylinder, strict inspection plan, unique sealing resolution, all these guarantee pump’s life time earlier mentioned five million cycles without routine maintenance.
Wetted content has a higher chemical resistance.
1. A number of materials for alternative, ensure chemical compatibility.
2. It has various sealing framework to match different functioning problems.
Optical detection is at the end situation. Photoelectric sensor can ensure whether pump is at the main situation.
2.two. 50XX-P Series Specification
Max Dispense Volume(Ul) a hundred 250 500 one thousand 2500 5000
Piston Diameter(Mm) 3.seventeen five.01 seven.08 10.01 15.eighty four 22.39
Quantity for each Stroke
(ul/phase)
.05 .a hundred twenty five .25 .five one.twenty five two.five
Travel Distance (mm) 12.seven
Direct (mm) 1.27
Distance per Stroke
(mm/step)
. 0571
Expected Life (Cycles)1 five million
Coefficient Of Variation
(CV)two
one.five%
Dispense CZPT3 2%
Working Pressure(MPa) .three
Relationship Port 1/four-28 UNF, M6
Mediums4 drinking water, weak acid and bases and many others.
Be aware:
one: Make sure you speak to us if the medium is air.
two: The CV is tested under 2% range.
3: Common precision is examined underneath two% selection.
4: It should be confirmed if using other mediums.

 

High Precision Plunger Pump for Diagnostic Application

Widely Application Screw Type Feeding Pump for Filter Press Used Feeding Pump

Widely Application Screw Type Feeding Pump for Filter Press Used Feeding Pump

                                           High CZPT CZPT Pump/progressive cavity screw pump


The one-screw pump, a variety of rotary constructive-displacement pump with inner gearing, is mostly composed of a stator
with twin spiral chambers and a rotor engaged with the stator in the shaft sleeve. When the rotor is generating planet turning
motion by circling the axial line of the stator chamber, the sealed chamber shaped between the rotor and stator will make
axial displacement along the spiral line of the rotor, which will convey the liquid evenly, continually and consistently from 
the suction to the discharge aspect.

Product identify One screw pump                                                             
Content Solid iron, SS304, SS316, SS316L, 2205 etc.
Circulation charge Max 600m3/h
Strain two.4MPa or larger
Guarantee 12 months
Supply medium *A variety of viscous liquids, especially for liquids with higher viscosity which are challenging to be pumped.
*Different concentrations of fluids and separated dry medium.
*A medium that contains solids (up to 70%), fibers (up to 350mm) and suspended medium.
*Mixture of fluid, gas and strong.
*Sensitive fluids that can’t be agitated, sheared and squeezed.
*Corrosive liquid(PH=one to fourteen)
Application *CZPT protection:industrial and life sewage treatment method, oily h2o therapy,the supply     of various muddy drinking water with sound particles and brief fiber, oil-h2o separation and squander
 gas task, measuring addition of flocculant and its chemical brokers.
*CZPT industry:the shipping and delivery of cleanse/heavy oil, acid, alkail and salt resolution,different         viscous pasty and milky chemical grout, oil-water separation and waste oil recycling technique,         polymer supply.
*Exploration and mining:shipping drilling mud, mining h2o provide and drainage, h2o supply      of mining dust shaker,mortar and concrete portray of mining laneway wall.
*Drugs and foodstuff:supply health care ointment, syrup,jam,fermentation broth,honey,cream,starch    paste,toothpaste, and so forth.
*Ship creating:bilge cleansing pump, marine incinerator delivery pump, oil-drinking water separator                 matching pump, the shipping and delivery of cabin oily water and other medium.
*CZPT market:the delivery of a variety of gas oil, coal-water-slurry, resin, additive.
*Paper-making business:the shipping of various pulp, brief stock, slurry and waster water                 treatment method,chemical measurement, stoichiometry,uncooked materials planning, coating and coloring     approach.
*CZPTtrolyte processing:the shipping of a variety of cream,milk,suspension and other medium can not     be stirred and reduce.
*CZPT engineering: the preparing and shipping of coal drinking water slurry, the production and          preparing of titanium white, kaolin, and so on, filling and grouting.
*CZPT engineering:oil-h2o mixture, sludge with metals,metallurgy slurry,
  squander bunker emptying.
*CZPT industry: the shipping and delivery of cement motra, painting, lime milk and other paste liquid.

For one screw pump, we have sorts as flowing

FAQ

Q:Can you offer pump experienced with ANSI and ASME CZPT?
A:Yes, our pump compliant with ISO / ASME/ANSI CZPT.

Q:How to customize pumps and mechanical seals ?
A:Clients could deliver us application info, we will decide on ideal pump and seal kinds, or shopper could ship us drawings, We are effectively in OEM and ODM.

Q:How can I pay for my objects? What is the payment you can provide?
A:Usually by T/T, 30% down payment after PI confirmed, the harmony will be paid soon after inspection and before shipment. TT or L/C at sight

Q:How extended is guarantee?
A:one yr for major design guarantee.

Q:How lengthy is manufacturing direct time?
A:Usually fifteen working days. If shopper require urgently, we have a massive spare areas stock, we could complete assembly and screening in seven days.

Q:What is the shipping conditions you can give?
A:Depnends on customer’s needs, we can provide different transportantin terms, such as EXW, FOB, CIF.

Q:Who is in charge of soon after-revenue?
A:SUNPACE has specialist right after revenue provider staff, we will follow up the client’s remarks and recommend them very good solutions. Solve client’s difficulties and maintaining the clients revenue.

Q:Who is in demand of maintenance?
A:Neighborhood agent. If pump working has any dilemma on web site, our nearby agent will arrival the plant within 24 several hours

Send out message  Get solution Provide & Brochure!!!

 ↓↓↓

Widely Application Screw Type Feeding Pump for Filter Press Used Feeding Pump

Gear made in China – replacement parts – in N-Djamena Chad Metering Pump for Paint Application with ce certificate top quality low price

Gear  made in China - replacement parts -  in N-Djamena Chad  Metering Pump for Paint Application with ce certificate top quality low price

Gear  made in China - replacement parts -  in N-Djamena Chad  Metering Pump for Paint Application with ce certificate top quality low price

We – EPG Team the bigge EPT Chain and agricultural gearbox factory in China with 5 distinct branches. For more particulars: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828

Gear Metering Pump for Paint Application

A.[Merchandise Description]

   The style makes use of substantial common external spur gears enclosed inside a close tolerance housing assembly. This gives you the precise quantity of fluid dispensed per shaft revolution. The housing is made from precision ground and lapped a few-plate assembly. This assembly is aligned with dowe EPT to allow close management of operating clearances. This building approach in mix with a number of proprietary inner characteristics is what ensures exact, pulseless, and reliable flow beneath varying approach circumstances. When HangZhou Instrument pumps are coupled with a pre-packaged, integrated, closed-loop velocity management and a compact motor driver assembly (AC or DC), HangZhou Instrument is in a position to give the mo EPT exact and adaptable metering equipment pump system on the market.  

 

B.[Parameters]

Product

Displacement

(CC/R)

Complete Peak Base Top Min Inlet Strain Max Outpet Pressure Precision Temperature
GWMP-.15 .15 eighty three 28.1 <0.2Mpa <30Mpa +/-3% 200ºC

GWMP-.3

.3 eighty five 30.2 <0.2Mpa <30Mpa +/-3% 200ºC
GWMP-.six .6 85 32 <0.2Mpa <30Mpa +/-3% 200ºC
GWMP-1.2 one.2 ninety 34 <0.2Mpa <30Mpa +/-3% 200ºC
GWMP-2.4 2.four one hundred 42 <0.2Mpa <30Mpa +/-3% 200ºC
GWMP-3.6 3.6 a hundred and five 50 <0.2Mpa <30Mpa +/-3% 200ºC
GWMP-six six one hundred thirty 41 <0.2Mpa <30Mpa +/-3% 200ºC
GWMP-9 9 one hundred thirty five 46 <0.2Mpa <30Mpa +/-3% 200ºC
GWMP-twelve 12 a hundred and forty fifty one <0.2Mpa <30Mpa +/-3% 200ºC
GWMP-15 fifteen 145 56 <0.2Mpa <30Mpa +/-3% 200ºC
GWMP-20 twenty one hundred fifty sixty four <0.2Mpa <30Mpa +/-3% 200ºC
GWMP-thirty thirty 165 eighty <0.2Mpa <30Mpa +/-3% 200ºC
GWMP-40 40 ninety 215 <0.2Mpa <30Mpa +/-3% 200ºC
GWMP-50 fifty 97 215 <0.2Mpa <30Mpa +/-3% 200ºC
GWMP-60 sixty 104.5 230 <0.2Mpa <30Mpa +/-3% 200ºC
GWMP-seventy five seventy five 112 230 <0.2Mpa <30Mpa +/-3% 200ºC
GWMP-eighty eighty Personalized Tailored <0.2Mpa <30Mpa +/-3% 200ºC
GWMP-a hundred twenty five a hundred twenty five Personalized

Tailored

<0.2Mpa <30Mpa +/-3% 200ºC

Notice:Path of rotation: clockwise from the axis of rotation 

 

Product 6CC 9CC 12CC 15CC 20CC 25CC 30CC
A 130 135 140 a hundred forty five 150 158 a hundred sixty five
B forty one 46 fifty one fifty six sixty four 72 80

 

  Min Inlet Stress   <0.2Mpa
  Doing work Velocity   5~200 R/min
  Medium   Fluid
  Temperature   200ºC
  Max Outlet Force   <30Mpa
  Flow Potential   6-thirty(+/-30)CC/R
  Sealing   Merged seal

 

Product .15CC .3CC .6CC one.2CC 2.4CC three.2CC three.6CC
A 83 85 85 ninety one hundred 103 one zero five
B 28.one 30.two 32 34 forty two 47.six fifty

 

  Min Inlet Pressure   <0.2Mpa
  Operating Velocity   5~two hundred R/min
  Medium   Fluid
  Temperature   200ºC
  Max Outlet Pressure   <30Mpa
  Stream Ability   .15-3.6(+/-3%)cc/r
  Sealing   Combined 

C.[Installation]

D.[Organization Information]

  • Our Firm is Top 10 Manufacture on Alibaba
  • We have about 30 several years of encounter in Manufacture
  • Our merchandise have been exported to more one hundred coutries and location
  • ISO,SGS,CE and much more ceterficates for you reference
  • Patent engineering and a lot more than 3 several years working daily life

 

The use of first tools manufacturer’s (OEM) component quantities or emblems , e.g. CASE® and John Deere® are for reference needs only and for indicating item use and compatibility. Our business and the listed alternative parts contained herein are not sponsored, authorized, or created by the OEM.

Gear  made in China - replacement parts -  in N-Djamena Chad  Metering Pump for Paint Application with ce certificate top quality low price

Gear  made in China - replacement parts -  in N-Djamena Chad  Metering Pump for Paint Application with ce certificate top quality low price

Gear  made in China - replacement parts -  in N-Djamena Chad  Metering Pump for Paint Application with ce certificate top quality low price