Submersible Well Pump with ISO9001

Submersible Well Pump with ISO9001

Submersible well pump design perfect, the structure is sensible, and has little sounds, long life, little quantity, mild weight, handy to use and sustain, high efficiency and power preserving, constant reliable operation, not pollute the water, and many others. Implement to deep effectively have h2o, area irrigation, sprinkler irrigation, urban and rural mining enterprise drinking water supply and drainage.

QJ collection Submersible Deep Well Pump
1. Model-identify areas.
2. Seasoned staff.
three. Outstanding performance.
4. Direct manufacture

Product parameter:
1. Stream variety: Q=10-five hundred m3/h
two. Raise variety: H=15-405m
three. Diameter selection: 32–203mm
four. Temperature assortment: -fifteen -80° C

Merchandise overview:
QJ series Submersible Deep Nicely Pump layout ideal, the structure is reasonable, and has minor noise, lengthy existence, little quantity, gentle fat, handy to use and preserve, higher efficiency and energy saving, constant reliable procedure, not pollute the drinking water, etc. Utilize to deep properly have drinking water, subject irrigation, sprinkler irrigation, city and rural mining enterprise drinking water supply and drainage.

Design signification:
200——Foundation No.
QJ——–Submersible Pump
32——–Pump Flow
ninety one——–Pump Head

QJ (SQJ) Deep effectively submersible pump use conditions:
1.380V bias voltage doesn’t exceed ± five% and 50Hz frequency, and the deviation is not much more than ± 1% of the three phase electricity offer
two. The interior cavity of the motor must be crammed with drinking water
three. The initial phase impeller of the pump should be immersed into the dynamic h2o level at the very least 2m. And the electric pump unit underneath the static h2o stage ought to be in 70m. The distance from the motor base to well base need to be far more than 3m.
four. The temperature of the h2o ought to be within 20° C.
5. In the water, there are only .01% of sand (by excess weight) or considerably less.
six. The pH valve of the h2o ought to be among six.5 and eight.5.
seven. The hydrogen sulfide degree in the water must be 1.5mg/L or significantly less.
eight. The choride ions articles in the h2o must be 400mg/L or significantly less.
nine. Water which is produce from the water supply ought to satisfy the required of the pump’s carry on perform.

specification and performance parameter
Model Electricity(KW) movement (m3/H) .2 .four one 2
SJ1-6 .37 H (M)   1 33.five 33 thirty 19
SJ1-9 .37   fifty one fifty 46 29
SJ1-13 .fifty five   seventy three 72 67 forty two
SJ1-7 .75   96 95 87 55
SJ1-21   119 118 108 sixty nine
SJ1-twenty five   141 one hundred forty 129 eighty two
SJ1-28 1.5   158 157 one hundred forty five ninety two
SJ1-32 1.5   180 179 a hundred sixty five 105
SJ1-36 one.five   203 202 186 118
SJ1-39 two.two   221 219 202 128
SJ1-42 2.two   238 236 217 137
for more in depth specification and overall performance data , you should contact us immediately by electronic mail or phone.

Submersible Well Pump with ISO9001