Rexroth A2f Hydraulic Piston Pump and Repair Kits Supply

Rexroth A2f Hydraulic Piston Pump and Repair Kits Supply

 

Sequence: A2FO Series Axial Piston Quantitative Pump
Specifications: A2FO ten, 12, sixteen, 23, 28, 32, forty five, 56, 63, eighty, ninety, 107, a hundred twenty five, one hundred sixty, 180, 200, 250, 355, five hundred, 710, 1000
(Series 6)
Working pressure: Rated strain 35 MPa
Peak pressure four hundred MPa.
Characteristic:
 – The indirect axial quantitative pump is suitable for hydrostatic drive of open up circuit.
– Relevant to the field of strolling equipment or sector
– The output flow is proportional to the driving pace and displacement.
– The style of the push shaft bearing helps make the software realm reach the anticipated support life.
– Numerous technical specs can be matched with each and every actual travel.
– Favorable energy/weight ratio
– Compact framework and financial system
– Ideal volumetric performance
– Integrated plunger style with plunger ring.

 

Dimension ten twelve sixteen 23 28 32 forty five 56 63 80 90 107 a hundred twenty five one hundred sixty one hundred eighty two hundred 250 355 500 710 one thousand
Displacement Vg cm³ ten.3 twelve sixteen 22.nine 28.1 32 45.six 56.one sixty three eighty.4 90 106.7 a hundred twenty five 160.four a hundred and eighty two hundred 250 355 five hundred 710 1000
geometric, per revolution
Nominal pressure pnom bar four hundred 400 400 400 four hundred 400 four hundred 400 400 400 four hundred four hundred 400 four hundred four hundred 400 350 350 350 350 350
Maximum pressure pmax bar 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 400 400 400 four hundred 400
Maximum speed nnom 1) rpm 3150 3150 3150 2500 2500 2500 2240 2000 2000 1800 1800 1600 1600 1450 1450 1550 1500 1320 1200 1200 950
nmax 2) rpm 6000 6000 6000 4750 4750 4750 4250 3750 3750 3350 3350 3000 3000 2650 2650 2750 1800 1600 1500 1500 1200
Movement at nnom qV l/min 32 38 50 fifty seven 70 80 102 112 126 145 162 171 two hundred 233 261 310 375 469 600 852 950
Energy at nnomand pnom P kW 22 25 34 38 forty seven 53 68 75 eighty four 96 108 114 133 155 174 207 219 273 350 497 554
Torque 3) at pnom M Nm sixty six seventy six 102 146 179 204 290 357 401 512 573 679 796 1571 1146 1273 1393 1978 2785 3955 5570
Rotary stiffness c kNm/rad .92 one.twenty five 1.59 two.fifty six 2.ninety three three.twelve four.18 5.ninety four six.twenty five eight.seventy three 9.14 eleven.2 11.9 17.four eighteen.2 57.3 73.1 ninety six.one a hundred and forty four 270 324
Moment of inertia for rotary group JTW kg·m² .0004 .0004 .0004 .0012 .0012 .0012 .0571 .0042 .0042 .0072 .0072 .0116 .0116 .571 .571 .571 .061 .102 .178 .fifty five .55
Highest angular acceleration   rad/s² 5000 5000 5000 6500 6500 6500 14600 7500 7500 6000 6000 4500 4500 3500 3500 11000 ten thousand 8300 5500 4300 4500
Situation volume V l .seventeen .seventeen .17 .two .two .two .33 .forty five .forty five .fifty five .fifty five .eight .8 1.one 1.1 two.seven two.5 3.five 4.two eight 8
Weight (approx.) m kg six 6 6 9.five 9.5 9.5 thirteen.five 18 18 23 23 32 32 forty five 45 66 seventy three 110 155 325 336

Safety directions:
A2FO pump is developed for use in open up circuit.
– The project plHangZhou, installation and commissioning of the axial plunger device have to be carried out by experienced staff.
Before employing the axial plunger unit, you should read the corresponding instruction manual. If essential, you can get it from Bosch CZPT.
In the course of and shortly following operation, there is a risk of burning in the axial piston device. Suitable safety actions (this kind of as donning protecting clothes) must be taken.
The characteristics of the axial plunger device could range with different operating situations (doing work strain, oil temperature).
Work CZPT Oil Port:
· Oil nozzles and set threads are made according to the greatest recommended stress. CZPT or program makers need to make certain that the safety element of connecting elements and pipes satisfies the specified doing work situations (strain, movement, hydraulic oil, temperature).
· Perform pipeline nozzles and practical nozzles are only utilized in hydraulic pipelines.
– The information and instructions contained below must be adopted.
The product are not able to be approved as a ingredient that follows the standard mechanical security concept of ISO 13849.
Overflow valves will be mounted in the hydraulic system.
Use the subsequent tightening torque:
· Connector:
Refer to manufacturer’s recommendations for tightening torque of the joints employed.
· Install bolts:
For installation bolts with ISO metric threads in accordance with DIN 13 CZPT and with ASME B1.one CZPT threads, we advise that the tightening torque of each box be checked in accordance to VDI 2230.
· Thread holes in the axial plunger unit:
The highest allowable tightening torque MG Max is the greatest value for threaded holes and shall not exceed that benefit.
· Locking screw:
For the steel locking screw supplied with the axial piston device, the fastening torque MV essential for the locking screw must be employed.

 

Rexroth A2f Hydraulic Piston Pump and Repair Kits Supply