Pneumatic Pressure Test Pump Pneumatic Submersible Pump Pneumatic Water Pump

Pneumatic Pressure Test Pump Pneumatic Submersible Pump Pneumatic Water Pump


Product Description

The fluid pressurized handle cupboard has been equipped with the fluid booster pump,the push air h2o filter,the strain regulator valve, Stress gauges and handbook pressure minimize valve. The main elements of the equipment are assembled in shut stainless metal cupboard or stainless steel frames. The stress gauge,valve and force regulator will be mounted on the panel. The corresponding indicator will also be marked on the panel.

The best working higher strain can be achieved by altering the driving air stress. When the driving air stress and output strain are well balanced, The pump will immediately quit the filling pressure, and the output force will continue to be at the preset value.

The hydraulic device can be utilized for force screening of a variety of parts, study and testing institutions and industrial strain subject.

Booster pump have a range of stress ratios, These series of pumps are perfect choice for various hydraulic power operations. The highest working force up to 640Mpa.

The output force is made by pneumatic booster pump, For that reason the electrical link will not be needed.

The structural design and style of the Fluid pressurized manage cabinet are compact and in accordance to the unique prerequisite of buyers, Blended the air pushed fluid booster pumps,valves ,manage switches and other precision accessories are assembled in the frame or shut cupboard.

The pump will end doing work immediately when the output strain reaches the preset value, The pump will start routinely when the outlet pressure drops marginally or the air travel pressure raises.

Merchandise parameters

CZPT pumps characteristic is a huge air piston joint to a more compact diameter piston. The stress ratio is the big difference of these two regions and is the approach of figuring out optimum outlet stress. Increased pressures attained by making use of larger stress ratios.
CZPT design reflect the pumps nominal force ratios, while the complex info suggests actual ratios. The outlet stress is very easily to set by way of a straightforward regulator. By multiplying the strain ratio by the obtainable store air force, the nominal liquid stress can be calculated.
Basically the principle of operation is comparable to a reciprocating amplifier where handle of the piston at the finish position is reciprocating , The automated reciprocating motion of the piston is managed by a built-in four-way valve.
CZPT pumps are air pushed at a travel air pressure of 3 to 8 bar (29 to 116 psi) by the standard CZPT. 


Strain ratio

Max outlet pressure  (bar)

Max flow   (L/min)

Connection size(inch)CZPT

Link dimension(inch)   Inlet

Relationship measurement(inch)   Outlet






NPT 1/2

NPT 1/2






NPT one/two

NPT 1/2






NPT one/2

NPT one/2

LU-LDD-sixty four



four.ninety four


NPT one/two

NPT 3/8






NPT one/2

NPT three/eight

LU-LDD-a hundred

one hundred:1




NPT one/2

NPT three/8






NPT one/two



a hundred seventy five:1


1.eighty one


NPT three/8







NPT 1/4


LU-LDD-four hundred

four hundred:one


.seventy nine


NPT one/four


In depth Images

Technique configuration

The liquid booster pump mainly is made up of air push chamber, pressurizing chamber, automobile reversing valve, inlet check out valve, outlet check valve, Higher good quality sealing elements, air generate piston, pressurizing piston, silencer and so on.
CZPT hydraulic test pump technique largely includes an air pushed liquid  booster pump, stress gauges, liquid filter ,air filter, air regulating valve,management valves,pipelines, cupboard , strain release valve  etc.   
The principal areas of the products are assembled in closed stainless steel cabinet or stainless metal frames. The pressure gauge,valve and strain regulator will be mounted on the panel. The corresponding indication will also be marked on the panel.  

Item advantages

 1. Outfitted with high high quality pneumatic chemical reagent injection pump, It can very easily achieve any adjustable and controllable output pressure and stream.

two.The get in touch with liquid section is stainless metal, strong corrosion resistance, ideal for a assortment of chemical reagents

three. It can be utilized at different levels of wellhead pressure, the strain system has management operate.

four.CZPT reagent injection program output strain is high, The output strain can be modified by means of the pressure regulating valve, the technique has to cease doing work below the set force

five.CZPT technological innovation, affordable structure design and style. The attributes of little measurement, light-weight weight, lovely physical appearance

six.By air/gas pushed, no need to use electrical energy, there will be no spark created, protected explosion-evidence




Our Solutions

 1. We might like to provide our skilled suggestions with regards to devices, materials, packing and market place for this product.

2. We’d like to customise unique equipment in accordance to customer’s ask for.

three. We might like to aid our customers for booking ship as customer ask for.

5. Operation handbook will be supplied following shipment.

six. We supply two calendar year guarantee.

7. Totally free putting on components will be despatched collectively with the equipment .

eight. Functioning video of the machine will be sent to you accordingly to your require.

Company Data


 1.Q : Are you manufacturer ?

A: Indeed, We are the producer with constant and improved R&D. Generation, CZPT Check and provider offer.

two.Q : Can I get your value listing ?

A: Sure, Confident. In buy to deliver you our available offered cost. Please choose the products and enable us know the product product and necessity in depth.

3.Q : Do you have inventory for all things?

A:In standard, we have some stock, even though if you need a bulk buy, we nonetheless want time to produce it. Of training course, we will notify all specifics you ahead of your payment.

4.Q : What is payment terms ?

A: Sample buy : a hundred% entire payment just before start to generation

Big buy : 30% deposit initial, 70% pay out after see the BL duplicate

5.Q: Can give free of charge sample ?

A : Free : if little spare elements and the expense not as well significantly is okay

Not Cost-free : the price expensive and all the device can not be cost-free

six.Q : How extended can be concluded the products ?

Supply day:  5-30 working times soon after deposit compensated

Two years guarantee, when the merchandise achieve to vacation spot.

Pneumatic Pressure Test Pump Pneumatic Submersible Pump Pneumatic Water Pump